It is also possible (though not recommended) to manually configure your modem.
After connecting your modem there are two key steps to manually configure your modem for the Optus DSL Broadband service: PC settings - Configure your computer's Ethernet network interface.
While these instructions are provided for your reference, the simplest and recommended method to install and configure your modem for the Optus DSL Broadband service is to follow the step by step instructions on the self-installation.When the Power light is rapidly flashing, the Modem 2000 mercedes e320 owners manual is initializing.Step 2 of 5 Click on the word Setup in the green menu of options on the left side of the web page.Ensure all boxes are not ticked, except "Use Attack Detection System ensure napt is selected, and click Next.Ensure the VPI is set to 8, VCI is set.Top, installing Your Modem, you will find detailed step by step instructions for installing your modem on the self-installation.Can be used in place of an Ethernet cable.Print, print page 1, rename the bookmark, delete from my manuals?Bridge mode for Optus Speedstream 4200 (to connect a router First, ensure you are connected using a cable between the computer connected directly to the Speedstream modem.Step 3 of 5 The next screen will ask you to disconnect and reconnect to the Optus DSL Broadband service.Only the USB driver supplied on the self-installation CD will work with the Optus DSL Broadband service.Choose PPPoE and click Next.2, reset, reset button, used to restore modem to factory settings.If you do not have the self-installation CD, you can download the latest drivers from the Siemens website.Click "Next " to accept the standard name (generally "PPPoE 8/35.4, ethernet, ethernet 10/100 Base-T RJ-45 port, connects to the network card in your computer.
Click the Apply button.
Only the USB driver supplied on the self-installation CD will work with the Optus service.
Function 1, power, the Power light displays the Modem's current status.
Click PPPoE 8/35.Click the "8/35" number under the VC heading on the left.Only a web browser is required.This is done by entering the IP address in the address bar of the browser window as follows: Note: If you are updating the password in your modem, please complete steps 1 to 3 only.Step 1 of 5 Enter http (Default IP address of the Optus Supplied Siemens SpeedStream 4200) to access the modem Configuration software.While the following information is provided for your reference, using the self-installation CD is the recommended method for configuring your modem.Click UPnP, under Setup on the left menu.Leave the static IP address field blank, and click Next.Adsl adsl Modem Setup Guides Siemens Speedstream 4200, find the IP address of the modem by checking the IP address assigned by dhcp to your computer.3, dSL, the DSL light illuminates when quirks medisafe user guide the Modem is connected to a DSL line and the unit is able to synchronize to the DSL signal from the ISP.USB, the USB light illuminates when the Modem is connected to a computer vis its USB port.If prompted for a username and password, use 'admin' and 'admin'.The modem will count back from 45 seconds, and the connection should then be active.Connecting the Cables, starting Your Modem, manual Modem Settings.